Use and Care Manual

INSTALLATION AND ADJUSTMENT
8
Handling and Transportation:
1. Handle and move the unit Hold handles on side panels to move the unit
in upright position.
Make the unit in the upright position whatever handling or moving it.
Drain the water in the unit completely to prevent water leakage and wet
the oor or carpet before handling or moving the unit.
Installation & Adjustment:
Keep this mobile air-conditioner in upright position at least 2 hours before rst installation.
Do not install or operate this air-conditioner in bathroom or other wet environments.
This air-conditioner may be moved indoors conveniently; keep the unit in upright position while moving it.
The air-conditioner shall be placed on at surface.
Installation of exhaust hose assembly and its adapter:
1. Take out the exhaust hose assembly and its adapter from plastic bag.
2. Extend the exhaust hose at one end, screw the round end of adapter into exhaust hose at counter-
clockwise direction.
3. Screw adapter into right position, at least 3 laps, to keep good connection of exhaust hose assembly
and its adapter.
Installation of the exhaust hose assembly into unit:
1. Determine window seal-plate position, vertical or horizontal direction.
2. If window seal-plate will be in horizontal position, the slant panel A of
adapter should be upwards.
3. If window seal-plate will be in vertical position, and will be at left side of
window, the slant panel A of adapter should be at right direction.
4. If window seal-plate will be in vertical position, and will be at right side of
window, the slant panel A of adapter should be at left direction.