Use and Care Manual
12
MAINTENANCE
Maintenance and Service:
Turn off the unit and pull out the plug before maintain or send the unit to service center.
1. Surface cleaning: Clean the unit surface with wet and soft cloth, but do not use chemical solvents such
as alcohol and gasoline to avoid any damage to unit.
2. Filter cleaning: Clean the lter every two weeks, otherwise it would inuence the unit performance if lter
clogged with dust.
Grip the lter handle and take it out gently in correct direction.
Clean the lters gently in warm water about 104°F(40°C) mixed with
detergent, and dry in the shade.
Push lter in even force gently into correct place to avoid any damage.
DO NOT squash the mesh.
DO NOT hit the mesh with sharp objects or brush.
End of Season Storage:
1. Screw off the drain cover, and then pull out the stopper to drain water completely.
2. Keep the unit running in fan mode half day to dry inside of unit completely to prevent from going mouldy.
3. Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar, insert the plug into
the universal xing hole at the back panel of the unit, install the water plug and drain cap.
4. Remove the heat exhaust hose assembly, clean and keep it properly.
Hold the exhaust hose assembly with both hands when removal.
Push the fasteners aside on exhaust air outlet using your thumbs, then pull out exhaust hose assembly.
5. Pack the air-conditioner properly with soft plastic bag and put it in dry place with appropriate dust-proof
measures and keep the unit away from children.
6. Take out the batteries from the remote control and keep unit in a try place, including all accessories well.