Use and Care Manual
INSTALLATION AND ADJUSTMENT
10
Slide the adapter downwards and assure the adapter installed in
good position.
Lock the screw tightly to avoid fall off.
Exhaust hose can’t be bent or with exure higher than 45 degrees, in
order to keep good ventilation of exhaust hose.
NOTE: The exhaust hose is 280mm-1500mm long and which is determined by the specication of the
air-conditioner (s). Do not use prolonged the hose or replace it with other different hoses as this may
affect the functions of the air-conditioner. The exhaust hose must be smooth or it may lead air-conditioner
overheat and trip because exhaust hose is obstructed.
Drainage Instruction:
1. Manual Drain: When the water volume reaches its alarm level in the water tank, warning sounds will
sound and the unit will automatically stop working. Both water-full indicator and “FL” is ashing on the LED
display window.
2. Put the tray below the water outlet at the back of the unit.
3. Screw off the drain cover, unplug the water stopper for water ow into the tray.
4. Plug in stopper and screw the water cover tightly onto water outlet after drainage.
Protect the drain cover and water stopper properly.
Move the unit carefully to avoid the leakage if it is necessary.
Tilt the unit slightly backwards when draining.
Block the drain hole as soon as possible before the tray is full if it can’t hold all water in the unit to prevent
the water leakage and wet the oor or carpet..
Water stopper and drain cover must be tightly installed, to avoid new condensate to wet the oor or
carpet when the unit re-starts working.