8000 BTU 4-IN-1 PORTABLE AIR CONDITIONER ITEM: 99913 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
IMPORTANT SAFETY INFORMATION NEVER hit or shake the unit to prevent damage. NEVER spray water or place the unit near water to prevent electric shock. NEVER place the unit near gas appliances, fire or flammable liquids. Two or more people to move or install air conditioner. DO NOT let children play near the unit. Keep the unit at least 1 meter away from TV or radios to avoid electromagnetic interference. DO NOT expose the unit under direct sun light to avoid surface color fading.
FEATURES AND SPECIFICATIONS The Barton Portable 8,000 BTU Air Conditioner cools, circulates, and dehumidifies the air in your home. With 3 speed settings, you can adjust the settings to personalize your comfort. This portable air conditioner is designed to cool a single room up to 250 square feet. It is self-evaporating, so you empty the water less often and has a washable permanent mesh filter, so you won’t be running out to buy more.
IDENTIFICATION 4
OPERATION AND SETTINGS ON/OFF BUTTON TIMER INDICATOR TIMER BUTTON COOL MODE POWER INDICATOR MODE BUTTON SLEEP MODE INDICATOR REMOTE CONTROL SIGNAL RECEIVING WINDOW FAN SPEED FAN SPEED INDICATOR LED DISPLAY WINDOW UP BUTTON WATER-FULL INDICATOR TIMER INDICATOR FAN MODE INDICATOR DOWN BUTTON DEHUMIDIFY MODE CELSIUS/ FAHRENHEIT TEMPERATURE INDICATOR Control Panel Operation: This unit features Cool, Dehumidifying, Fan and Sleep mode operations. 1. Turn on the unit. 2.
OPERATION AND SETTINGS 5. Adjust temperature: The temperature can be set within a range of 62.6-86°F (17-30°C) under cooling mode. Press “+” or “-” buttons to increase or decrease the temperature 1.8°F (1°C) by pressing once. Press + and - buttons together to convert Celsius degrees and Fahrenheit degrees and corresponding indicator will light up. 6. Adjust fan speed: Press the FAN button to select a desired fan speed. 7.
REMOTE OPERATION Remote Control Operation: Power Button: Press this button to start unit when it is energized or stop the unit when it is in operation. Timer Button: Press this button to set unit automatic on and off time. High Button: Press this button to select high speed of fan running (except dry and sleep modes). Low Button: Press this button to select low speed of fan running. Up Button: Press this button to increase temperature or timer setting.
INSTALLATION AND ADJUSTMENT Handling and Transportation: 1. Handle and move the unit Hold handles on side panels to move the unit in upright position. Make the unit in the upright position whatever handling or moving it. Drain the water in the unit completely to prevent water leakage and wet the floor or carpet before handling or moving the unit. Installation & Adjustment: Keep this mobile air-conditioner in upright position at least 2 hours before first installation.
INSTALLATION AND ADJUSTMENT 1. Take two ends of exhaust hose and its adapter assembly. 2. Put front end of exhaust hose assembly onto jugged position of exhaust outlet of back panel. 3. Keep the right direction of slant side A of adapter, for ease installation of window seal-plate. 4. Hold the unit by one hand, carry the exhaust hose assembly with another hand and push it into unit gently, for good lock of two parts.
INSTALLATION AND ADJUSTMENT Slide the adapter downwards and assure the adapter installed in good position. Lock the screw tightly to avoid fall off. Exhaust hose can’t be bent or with flexure higher than 45 degrees, in order to keep good ventilation of exhaust hose. NOTE: The exhaust hose is 280mm-1500mm long and which is determined by the specification of the air-conditioner (s). Do not use prolonged the hose or replace it with other different hoses as this may affect the functions of the air-conditioner.
ADJUSTMENT AND MAINTENANCE Continuous drain: 1. Screw off the drain cover and unplug the water stopper. 2. Connect drain-hole with φ13mm PVC drain hose, as deep as possible to avoid leakage. 3. Pull the drain hose to bathroom or outdoor. Drain hose must be installed before unit starts working. Keep the drain cover and its stopper properly installed when continuous drainage is adopted.
MAINTENANCE Maintenance and Service: Turn off the unit and pull out the plug before maintain or send the unit to service center. 1. Surface cleaning: Clean the unit surface with wet and soft cloth, but do not use chemical solvents such as alcohol and gasoline to avoid any damage to unit. 2. Filter cleaning: Clean the filter every two weeks, otherwise it would influence the unit performance if filter clogged with dust. Grip the filter handle and take it out gently in correct direction.
TROUBLESHOOTING SCHEMATIC DIAGRAM FUSE PARAMETERS Model: FSD or 50F Voltage: 250V Current: 3.15A This marking indicates that the product should not be disposed with other household wastes throughout the world. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
PARTS DIAGRAM 14
PARTS LIST 15
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
