Use and Care Manual

MAINTENANCE / TROUBLESHOOTING

1. Connect the power cable to a 13amp supply that is

located in a safe, dry area.

• The Electric Pao Heater is equipped with one heat seng

• The switch on the heater head is used to control the

power. (I) posion for turn on. (0) posion for turn o.

OPERATION AND MAINTENANCE

2. Acvang buon on the heater is to operate heater

by manually. Press one me for 1500 W,

Press two mes for turn o the heater.

• The Remote control is also used to control the heat. (I) for heat seng 1500W,

the 0 posion is o.

• Although the pao heater is shower proof, do not use when raining or in wet

condions.

• Always disconnect the power cable from the electrical supply, when the pao

heater is not in use.

MAINTENANCE

Unplug the unit and let it cool completely.

• To keep the heater clean, the outer shell may be cleaned with a so, damp cloth. You may use a

mild detergent if necessary. Aer cleaning, dry the unit with a so cloth.

• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the

heater. This may cause damage or deterioraon to the surface of the heater.

• Although this heater is outdoor approved, DO NOT immerse the heater in water for your safety.

Wait unl the unit is completely dry before use.

STORAGE

If the heater will not be used for a long period of me, store it in a cool, dry locaon when not in use.

To prevent dust and dirt build-up, use the original packaging to repack the unit.

TROUBLESHOOTING

If the heater will not operate, please check the following before seeking repair of service:

• Check if the power cord is plugged into an electrical outlet, if not plug in.

• Check if electricity to the main fuse is working.

• Make certain the power switches are turned on. If not, choose a seng.