Installation Guide

OPERATION
3
4
Operang Instrucons:
• Plug the Pao Heater into a grounded 110-120v power outlet
• Only operate the heater when it is in the upright posion.
• Our Electric Pao Heater is equipped with three heat sengs
• The ON/OFF switch on the heater is used to control the power of the heater.
Press the on/o switch on the heater when the plug had been connected.
Remote Control Operaons:
• To operate the LED light, press the LIGHT buon of the remote
control.
• Press on the LOW buon for 700W.
• Press on the HIGH buon for 800W.
• Press OFF boom for turn o all.
WARNING: The main power switch must be turned on to use
the remote control.
Acvang Press Switch Operaons:
If you lose your remote control, please touch the Acvaon Buon to operate your heater.
• Press the ON/OFF switch to acvate the heater.
• Touch the buon once to operate the heater on 700W power.
• Touch the buon twice to operate the heater on 800W power.
• Touch the buon three mes to operate the heater on 1500W power.
• Touch the buon four mes to acvate the LED light ambient lighng and to operate the
heater on 1500W power.
• Touch the buon ve mes to acvate the LED light ambient lighng without heat.
• Touch the buon six mes to shut o the light and heat.