Instructions / Assembly

3
OPERATION
1. Slowly open propane tank valve.
2. Press the knob and turn it counterclockwise
to the 90 degree ON position. When you
hear a click, observe the fire. If it is already
lit, continue to press the Range Knob for
3-4 seconds before letting hands out. Please
repeat the above ignition method.
3. When the knob is turned to the 90 degree position, the firepower is the maximum. You can continue to adjust the
firepower counterclockwise or clockwise.
4. Turn the Range Knob to OFF position and you can extinguish the fire.
NOTES:
CONNECTING NEW GAS SOURCE OR STOVE HAS NOT BEEN USED FOR A LONG TIME, THERE MAY BE
AIR INSDE THE HOSE. YOU MAY NOT IGNITE THE STOVE AT THE FIRST TIME. AT THIS TIME, THE
OPERATION CAN BE REPEATED TILL AIR INSDIE THE HOLE IS EXHAUSTED. NEVER PUT THE HEAD
CLOSE TO THE BURNER WHEN IGNITION TO AVOID ACCIDENTS.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SUGGESTED ACTION
IGNITION ISSUES
Gas tank valve is closed
Open the Gas tank valve
Hose is blocked or out of shape
Clean or change the hose
Air inside the hose
Repeat ignition until air is pushed out of the hose
No gas inside the gas tank
Change with a new gas tank
GAS LEAK
Hose isn’t connecting or is broken.
Reconnect or change out the hose
Range Knob is not in the OFF position
Put the Range Knob into the OFF position
OPERATION
RACKS
BURNERS
RANGE KNOBS
GLASS TABLE
HOSE &
REGULATOR