Manualshelf

Instructions / Assembly

ManualsBrandsBarton ManualsElectric Fireplace Inserts1500-Watt Electric Infrared Fireplace Insert Space Heater Logs with Remote Control
1234567
OPERATION / MAINTENANCE
3 4
First turn on the Power switch on the right side of the heater. You will hear a beep indicating power is supplied to
unit. The Power switch supplies power to all the function of the appliance. This switch must be in “ I” position for
any functions including the remote control to work.
Press the Power button on the remote control, the heat and ame e󰀨ect will be on. Press the Power
button again, heat and ame e󰀨ect will be o󰀨. The fan will continue running for 60 seconds to
disperse remaining heat from inside.
Press the Timer button to set timer-power-o󰀨 function through control panel. Press the Timer button
to increase duration from 1h-2h-3h-4h-5h…….24h. The display panel will show 01-02-03-04-05…
.24.
Press the Timer button to set timer-power-o󰀨 function through remote controller. Press the Timer
button to increase duration from 1h-2h-3h-4h-5h…….24h. The display panel will show 01-02-03-04-
05….24.
Press the Heater button on the control panel, the heater will start, it is High heating mode, The
display panel show OH, press it once again, it is Low heating model, The display panel show OL,
press the button the third time, the heater will be o󰀨, the fan will continue running for 60 seconds to
disperse remaining heat from inside.
Press the Heater button on the remote controller, the heater will start, it is High heating mode, The
display panel show OH, press it once again, it is Low heating model, The display panel show OL,
press the button the third time, the heater will be o󰀨, the fan will continue running for 60 seconds to
disperse remaining heat from inside.
(I)Set on control panel, under standby, Press Flame button on control panel, the ame will be on at
brightest. The charcoal set will be lit up and icker automatically. Each time this button is pressed,
the intensity of the ame decreases. There are ve brightness levels you can cycle through including
the OFF setting.
(II)Set on remote controller, press the power button, the ame will be on at brightest automatically.
Then to press Flame button to adjust the ame brightness with 5 levels. The Flame can be used
independently.When pressed,the display panel show 01,02,03,04,05 level
TROUBLESHOOTING