Instructions / Assembly
SAFETY INFORMATION
1
SAFETY INFORMATION
2
Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in injury and/or property damage. Save all warnings and
instructions for future reference.
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY
OF THIS OR ANY OTHER APPLIANCE.
This appliance comes equipped with an overheat protection safety device. Should the appliance begin to
overheat for any reason, it will automatically turn all heater functions of the appliance o. The appliance will
have to be reset prior to continuing use. To reset the overheat protection safety device, turn all controls o and
unplug the appliance. Wait 10 minutes, plug the appliance back in and turn on.
It is normal for the power cord to feel warm to the touch; however, a loose t between the outlet and the
plug may cause overheating of the plug. If this occurs, try inserting the plug into a dierent outlet. Contact a
qualied electrician to inspect the original outlet for damage.
1) Read all instructions before using this heater.
2) This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles
when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and
curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
3) Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater
is left operating and unattended.
4) Always unplug heater when not in use.
5) Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped
or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.
6) Do not use outdoors.
7) This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate
heater where it may fall into a bathtub or other water container.
8) Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route
cord under furniture or appliances. Arrange cord away from trac area and where it will not be tripped over.
9) To disconnect heater, turn controls to o, then remove plug from outlet.
10) Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric
shock or re, or damage the heater.
11) To prevent a possible re, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like
a bed, where openings may become blocked.
12) Do not use it in areas where gasoline, paint, or ammable liquids are used or stored.
13) Use this heater only as described in this manual. Any other use not recommended by the manufacturer may
cause re, electric shock, or injury to persons.
14) Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable
power tap (outlet/power strip).
CAUTION: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock,
this plug is intended to t only one way in a polarized outlet. If the plug does not t fully in the outlet, reverse the
plug. If it still does not t, contact a qualied electrician. DO NOT attempt to defeat this safety feature.