Installation Guide

7
Flame effect must be ON for
heater to function.
1. Press once for low heat (750W).
2. Press again for high heat
(1500W).
3. Press again to turn off heater.
1. Heater & fan turn on low (750W).
Indicator light turns on. Warm air blows.
2. Heater & fan turn on high (1500W).
Indicator light turns on. Hot air blows.
3. Heater turns off. Fans may blow air
after heater is turned off to cool down.
Adjust the heater
The temperature setting range is
62°F to 82°F, the temperature is
adjustable by 2°F increments by
pressing the up or down buttons.
To set the temperature button to select the
desired temperature.
Setting the Timer
Press the Timer button to cycle
through the eight timer
settings(1H,2H,3H,4H,5H,6H,7H,8H
) and the OFF setting.
Press the timer to choose how may hours
heating.
NOTICE
To improve operation, DO NOT press the buttons too quickly. Give the unit time
to respond to each command.
WARNING!
NEVER leave heater unattended during operation! Failure to do
so could result in personal injury or property damage.
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.