Use and Care Manual

ManualsBrandsBarton ManualsComposters37 Gal. Rotating Garden Waste Soil Tumbling Composter

1

2

3

4

5

6

7

8

4

ASSEMBLY

5. Install the remaining panels. If required, slide

the hatches into position. When fully assembled,

the drum is ready to be attached to the frame.

6. Slide the frame central tube (aa) through the

drum.

7. Assemble frame tubes “bb”, “cc” and “dd”

together as shown. At each joint there is a

spring-loaded pin. Press the pin in then joining

the tubes. When correctly assembled the pin

should pop out through the locating hole in the

other tube.

8. Place the central tube/drum assembly into

position on the top of the frame.

9. Attach the central tube to the frame using the

long screws “G” nuts. After doing this, assembly

is complete.