Preliminary Version Introduction The TL Level System has three main components: Monitor, Controller, and PC Software. The Monitor assembly includes the electronics housing (sensor/RF Transmitter), the “wave guide” probe, and the probe weight. The Controller includes the an Antenna, and an AC power adapter. The Software features/operation, and installation are covered in the manual included with the software. A. Install controller @ retaliation B. Install software on host PC C.
User Manual for software installation Precautions A. Ensure the bottom of the probe does not rest on the bottom of the tank. This causes the wave guide to become slack and causes measurement errors. Battery B. For tanks with a riser, the wave guide must not touch the ~~ Compartment side of the riser. Points where the wave guide touches another object will cause false readings. 1. Install the monitor by screwing the bottom of the monitor into a 1-1/2 or 2 inch female NPT connection — hand tighten only. 2.
ion tent posit, at Power Requirements Battery Pack [4-AA Alkaline] Typical Life: 2 yrs.@4 hr. transmit interval Construction Weatherproof, non-corrosive, enclosure Pressure Rating 15 PSI (1 bar) maximum Construction Materials .. . Teflon/Brass or Teflon/SST, Plastic, and Epoxy Approvals (pending) Intrinsically Safe; CSA Class I, Div. 1, Groups C &D MOUNTING .vevvercreronsernerrcosermans 2 inch and 1-1/2 inch NPT (standard) Shipping Weight approx.) Monitor and Probe — 2.4 Ios {1.
“TankScan™ Monitor 3.2" x 8.1% {155 mm} Housing (Bottom View) Bottoms} my (76 mm) TankScan™ Controller Antenna (RF-Receiver internal Modem) approx. 13° Wall Mount Hole Guide (330 mm} { }omen apron} T 4 & 0.1875" 4 Vertical “a Orientation aod 55 aod) ( 0.4375" : an ; pul 5 (38 mm) Controvert Back 1 Wall Mount 7.25" Stand (ad a NOTICE Do not install controller near any RF sources (TV, Radio, etc.). Interference from such devices may cause loss of operation, data loss, and/or controller malfunctions.
PLIANCY STAT FCC PART 68 NOTICE This equipment complies with FCC Part 68 rules. The FCC registration number and Ringer Equivalent Number (REN) are printed on a label attached to the circuit board near the top left corner. You must, upon request, provide this information to your telephone company. The REN nurturer is used to determine the maximum number of devices that may be connected to the phone line and still have all those devices ring when your number is called.
and yard near phone ay be ber is as one jou in bile. You ask vou to corrected ions, or lo, you will phone pant. modem ly . digital Ade ordinate not recce to J to cause at the without shipment. CANADIAN DEPARTMENT OF COMMUNICATIONS NOTICE ‘The Canadian Department of Communications (DOC) label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational. and safety requirements.
rain instrument Systems, LLC 900 S. Turn bull Canyon Rd. City of Industry, CA 91745 USA (626) 961-2547 On the Web at ©Copyright 1999, Barton (instrument Systems, LLC. All fights reserved.
