Datasheet

LED-Board Diameter 200mm24V
C ALCULATED PARAMETERS AT T J = 20°C
LED Type
Osram Duris E5
LED Quantity pcs
42
Diameter mm
200
Power Supply Type
Constant Voltage (CV)
Power Supply Voltage V
24
Viewing Angle deg
120
Material Thickness mm
1,5
Cable Connection
WAGO 2060
Max Ambient Temperature °C
45
CRI
85
Min. Power Supply Current A
1,01
Total Power Consumption W
18,72
Colour temperature K 3000
Typical Luminous Flux lm
up to 1945
CE article number 1275395 (50762033)
W IRING DIAGRAM FOR LED CV M ODULES WITH PARALLEL WIRING
Constant
Voltage
Power Supply
-
+
Mains
~
LED Module
CV
+ -
Constant
Voltage
Power Supply
-
+
Mains
~
LED Module
CV
+ -
LED Module
CV
LED Module
CV
+ +- -
C OOLING
The modules are self-cooling and a heat sink is not required. Temperature test point (Tc) for measurement should be
localized in the middle of the board near LED’s thermal pad. The temperature at the tc point can be measured with
thermocouple or simple temperature probe.
The life of the module depends to operating temperature. Temperature at Tc should be lower than 65°C.
Relative Luminous Intensity
I V /I V (25)°C = f(T j ); I F LED = 120mA
Relative Spectral Emissi
on
-
V(λ) = Standard eye response curve
I rel = f (λ); T S = 25 °C; I F LED = 120 mA
V1.1