Datasheet

LED-Board 100x12mm 24V
CALCULATED PARAMETERS AT TJ = 20°C
LED Type
Osram Duris P5
LED Quantity pcs
7
Dimmension mm
100x12
Power Supply Type
Constant Voltage (CV)
Power Supply Voltage V
24
Viewing Angle deg
120
Material Thickness mm
0,8
Cable Connection
Molex A4001WRA-S-2P-1 ; AVX 9176-400
Max Ambient Temperature °C
45
CRI
85
Min. Power Supply Current A
0,17
Total Power Consumption W
3,12
Colour temperature K 3000
Typical Luminous Flux lm
up to 324
CE article number 1275379 (50751133)
WIRING DIAGRAM FOR LED CV MODULES WITH PARALLEL WIRING
Constant
Voltage
Power Supply
-
+
Mains
~
LED Module
CV
+ -
Constant
Voltage
Power Supply
-
+
Mains
~
LED Module
CV
+ -
LED Module
CV
LED Module
CV
+ +- -
COOLING
The modules are self-cooling and a heat sink is not required. Temperature test point (Tc) for measurement should be
localized in the middle of the board near LED’s thermal pad. The temperature at the tc point can be measured with
thermocouple or simple temperature probe.
The life of the module depends to operating temperature. Temperature at Tc should be lower than 65°C.
R
elative Luminous Intensity
IV/IV(25)°C = f(Tj); IF LED = 120mA
Relative Spectral Emission
-
V(λ) = Standard eye response curve
Irel = f (λ); TS = 25 °C; IF LED = 120 mA
V1.1