Use and Care Manual
bartesian.com
|
13
Troubleshooting
Cocktail Machine does not have power.
• Ensure unit is plugged into a working outlet.
• Ensure Removable Power Cord is plugged into Power Cord Port on back of unit.
Cocktail Machine will not make drinks.
• Check to see if "ADD WATER" is displayed on Control Panel. If so, add water to
Water Reservoir.
• Check that Cocktail Capsule is properly placed in Capsule Holder.
• Open Lid. Using a soft, dry cloth wipe off top of Cocktail Capsule and Barcode
Reader under Lid. Close and latch Lid. Check Display on Control Panel.
Spirit/water ows over the capsule.
• Ensure Removable Capsule Seal is in place on upper needle.
Cocktail Machine will not pump alcohol.
• Check if Spirit Bottle is placed in correct Spirit Bottle Holder.
• Clean Dispenser Lids.
• Follow "Important Instructions Before First Use."
• Clean Duck-Bill Valve. Follow Steps 4 and 5 of "Cleaning Removable Parts."
The Cocktail Machine does not respond or recognize when a Cocktail Capsule has been
inserted.
• Open Lid. Using a soft, dry cloth wipe off the top of Cocktail Capusle and Barcode
Reader under Lid. Close and latch Lid. Check Display on Control Panel.
• Ensure that Lid is properly latched.
Lid will not close with Cocktail Capsule installed.
• Make sure you are pushing down on Handle when closing Lid.
• Open Lid, reposition Cocktail Capsule, and try again. Ensure that Cocktail Capsule is
installed correctly. See “How to Make Cocktails”.
Cocktail tastes dierent.
• Ensure that labeled Dispenser Lid matches spirit in bottle.
• Ensure that correct Spirit Bottle is in correct Spirit Bottle Holder.
• Use ltered or bottled water in Water Reservoir.
TROUBLESHOOTING