User manual

User manual POLARIS Remote 19.1" / Remote 15"
28
Page 28
The local unit is compatible with the following devices:
PC PC/AT, PS2 and 100% compatible clones
Keyboard PC/AT enhanced keyboard. Some older XT/AT autosensing
keyboards may not be compatible.
PS/2 mouse Standard PS/2 mouse, Microsoft Intellimouse, Logitech
three-button mouse
Monitor SVGA, VGA, XGA, RGB (Sync on Green)
6.1.6 The local unit is compatible with the following devices:
■ Connect the local unit to the PC and the two devices using a CAT.5, CAT.6 or CAT.7
cable.
■ Power on your PC and check that the keyboard operates correctly. Boot an operating
system (such as WINDOWS) or application you intend to use. Check the mouse function
(if required).
■ Check that the link integrity LED on the local unit flashes on and off.
We recommend that the complete system is tested in one room before permanent
installation. If a long interconnect cable is not available, us a patch cable or test basic
unit operation with your PC.
All configuration and video tuning is carried out using the keyboard connected to the POLARIS Remote. A hot-key
sequence is used to enter command mode where settings may be adjusted and certain modes of operation configured (see
the IHSE manual for technical details).