User's Manual

Integration Manual
BARTEC
Sheett 6/7
3) Solder appropriate wires on RuBee Reader as shown in
the picture and fix them with UV glue.
4) Position the reader on the according 4 pins and glue
with UV glue.
5) Apply Sikaflex in the sealing area of the housing.
6) Put the RFID/RuBee lower housing on the upper
housing and press them together.
7) Fill the resin into the RFID/RuBee housing (without
empty space) and apply the opening of the lower
housing with Sikaflex.