User's Manual

Integration Manual
BARTEC
Sheett 4/7
6) Seal the screw heads and the wire openings with
Sikaflex.
7) Seal accomplished wires and inserts with Sikaflex.
2.2 RFID/RuBee external Gun
1) Drill 7 holes (1,0mm ) and 4 holes (5,5mm) with the
fixture in the lower housing.
Press 4 inserts into the big holes.
2) Lead the 7 wires (each with different colour) through the
drillings.
(LiY 0.08mm², d
iso
> 0.2mm)
3) Fill the RFID upper housing with Sikaflex as shown in
the picture.