User's Manual

Commissioning
Mobile Computer MC92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
38/73
Technical data subject to change without notice..
Revision D / Status: 10/2016
5.5 Handling accessories
DANGER
Non-certified accessories endanger explosion protection.
There is a risk of fatal injury in an explosive atmosphere!
 Only use original accessories from BARTEC/ZEBRA.
Only permitted outside the potentially explosive atmosphere:
 Charge battery.
 Insert/replace SD card.
 Remove/replace screen protector.
Further information is also provided by the ZEBRA documentation.
5.5.1 Insert battery
Depending on configuration, the MC92N0
ex
-IS is supplied with a 7.4 V/2200 mAh battery.
Type
Order
number
Charge time
Battery (EU) for ATEX/IECEx
Lithium-ion battery 7.4 V / 2400 mAh
17-A1Z0-0001 Less than 8 hours
Battery (US) fo UL Division 1
Lithium-ion battery 7.4 V / 2400 mAh
17-A1Z0-0002 Less than 8 hours
Battery for UL Division 2 and ATEX Zone 2/22
Lithium-ion battery 7.4 V / 2400 mAh
B7-A2Z0-0006 Less than 8 hours
Work steps:
1. Charge the battery only outside hazardous areas.
2. Use only batteries which have been tested or certified by BARTEC for this
purpose.
3. Insert the battery with the battery contacts facing forwards into the battery
compartment under the keypad.
4. Make sure that the battery’s charging contacts agree with the charging contacts
in the battery compartment.
5. Push the battery into the battery compartment until it locks into place.