System information

IDM

Bluetooth

Reference Manual

Appendix

8014563/WE95/2012-07-25

How to connect IDM BT Scanner with configuration software IDM Set Up Tool

The IDM Set Up Tool is a windows based configuration software for IDM scanners. The following steps describe how to

configure an IDM Bluetooth scanner via this software tool. You can download the IDM Set up software for free on

www.sick.com.

1. Make sure, that the Scanner is paired with the base station (pair mode).

2. The interface has to be set to RS232 or USB COM. You can test the communication with any terminal program. After

testing close the terminal program so the com port is free again.

3. Please scan the Uninstall Code. Then scan the IDM Set Up Link Code. It’s important to place the scanner into its base

station right now.

4. Start the IDM Set Up Tool Software and click on Upload.

5. Choose the right Communication Port. Afterwards click on the Upload button. The software will connect to the scanner

and the Configuration Window opens.

6. Do your settings.

7. By clicking on the Apply button the download section opens. It’s important that you scan the IDM set up link code again

and place the scanner back inside the base again.

8. Click on the download button to start the download. After successful download you can close the IDM set up tool.

9. To re-connect scanner and base station, scan the pair mode code and place the scanner in the base station.

IDM Set Up Link Code