System information

Reference Manual
I
DM
Bluetooth
Configure Your IDM BT
8014563/WE95/2012-07-25 © SICK AG · Germany · All rights reserved · Subject to change without notice 53
S
SS
S
PROGRAM
Serial Interface Control
♦
♦♦
♦ Delay Setting ♦
♦♦
♦
Family Code Selection P.C Parameter Selection Option Code
Intermessage Delay
SS
MS
None

1-99 (x10) msec.
Scan 2 digits from the option code chart in Appendix, then IDM BT will terminate this
selection automatically.
FIN
(2 digits)
Intercharacter Delay
SS
MS
None

1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then IDM BT will terminate this
selection automatically.
FIN
(2 digits)
Interfunction Delay
SS
MS
None

1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then IDM BT will terminate this
selection automatically.
FIN
(2 digits)

Intermessage Delay is a time delay between messages output by IDM. Increasing this delay will help host applications process the incoming data on time.

Intercharacter Delay is a time delay between data characters output by IDM. These two parameters are used to synchronize data communication when : 1) the data
transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3)
various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two
parameters.

Interfunction Delay is a time delay between the transmissions of each segment of the message string.

Intermessage Delay, Intercharacter Delay and Interfunction Delay cannot be only worked under SPP and HID modes.