System information

Reference Manual
I
DM
Bluetooth
Configure Your IDM BT
8014563/WE95/2012-07-25 © SICK AG · Germany · All rights reserved · Subject to change without notice 24
S
SS
S
Scan
“END”
IDM will exit programming mode, and store all
parameters in Flash Memory ASIC or non-volatile memory,
then issue the completion beeping.
Scan
“PROGRAM”
IDM will enter programming mode,
and inhibit all non-programming functions.
Scan
“SYSLIST”
IDM will list the product information and
revision number to host via selected host interface,
then issue the completion beeping.
Scan
“
M_DEFAULT
”
IDM will recover all programmable
parameters into factory preset configurations,
then issue the completion beeping.
Program & End
Program & EndProgram & End
Program & End
Please note that the IDM BT will take 3-4 seconds to store
parameters in internal Flash Memory ASIC or non-volatile
memory after you scan the “END”. Please don’t turn off the
power before the completion beeping. It may destroy all
configured parameters.
System List, Group & Master Default
System List, Group & Master DefaultSystem List, Group & Master Default
System List, Group & Master Default