System information

IDM

Bluetooth

Reference Manual

Getting Started

8014563/WE95/2012-07-25

General Procedure

Use USB Bus Power

Plug the AC power plug into the appropriate AC wall socket.

Plug the DC power cor

d of the power supply unit into the DC power jack of the cradle. The cradle will issue the power on

beeps. The center (upper) indicator of smart cradle will give one blue blink. The power indicator of charging cradle will

turn steady blue.

Place the scan

ner on the cradle. The status indicator of scanner will turn steady red if the battery is not fully charged.

When the battery is fully charged, the status indicator of scanner will flash green at regular interval.

Please charge the new battery pack for 8 hours prior to the first use.

USB 3.0 is available in your host device, both battery charging and regular operation can be supported by the USB

Bus Power without using external power supply.

If you want to use this feature, please slide the USB bus power switch to “ON”. Then connect the

cradle and host device

via USB cable.