User's Manual

RFID Snap On Modul
Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004
Product description
11/12
5. Commissioning and Operation
DANGER
Avoid electrostatic charge inside of hazardous location.
There is a risk of fatal injury in an explosive atmosphere!
 Don’t dry clean or wipe.
 Wear suitable clothes and shoes.
 Don’t use rubber gloves.
DANGER
Inproper use is a risk for the explosion protection.
There is a risk of fatal injury in an explosive atmosphere!
 The user may not make any alterations to the module.
 If a function error or a damage on the enclosure occurs then bring the device with
the module immediately outside of the hazardous location and switch it off.
DANGER
Not certified accessories are a risk for the explosion protection.
There is a risk of fatal injury in an explosive atmosphere!
 Use only original accessories from BARTEC.
Only allowed outside of the hazardous location:
 Snap on, release and remove of the module
5.1 Requirements inside of hazardous location
Don’t open it!
Don’t use, change or replace not specified!
Protect the device from impact effects!
Do not expose the equipment to any caustic/aggressive liquids, vapours or mist!
Avoid the effects of moisture!
Avoid the influence of heat that is outside of the specified temperature range!
Snap on of the 10-pin data interface is only permissible outside the hazardous area
and only with devices specified by the manufacturer!