Point ‘n View Binocular and Digital Camera Owners Manual www.barska.
For more information about BARSKA® and our optic products, please visit www.barska.
Table Of Contents Features...................................................................................... 4 Specifications ............................................................................. 5 Basic Binocular Use ................................................................... 6 Operation of Menu Buttons ........................................................ 7 Taking/Deleting Pictures ............................................................ 8 Taking/Deleting Video .................
Parts of the Binocular *SD Card not included 1. 2. 3. 4. 5. 6. 7. TFT LCD Display Up Button Down Button Set Button Focus Knob Diopter Adjustment Eyepiece 8. 9. 10. 11. 12. 13. 14. Objective Lens On / Mode Button Barrel USB Port SD Slot Battery Compartment Tripod Adaptor Screw www.barska.
Product Specifications Camera Specifications 1. Resolutions: 12.0MP 2. Image Size: Still image: 0.3MP---640*480 3.0MP--2048 x 1536 5.0MP--2560 x 1920 8.0MP--3264 x 2448 12.0MP--4032 x 3024 Movie: 30fps@QVGA / 20fps@VGA 3. Image Format: Still image –JPEG Movie—AVI (no time limits) 4. Storage media : SD/MMC Memory Card (up to 16GB) 5. Zoom: 1x-4x 6. Exposure and White Balance : Automatic 7. Display:1.5” TFT LCD color Screen 8. Interface: USB 1.1 9. Power Supply: 4 - AAA Alkaline Batteries 10.
Basic Binocular Use 1. If you wear eye glasses, fold down the eyecups and hold the eyepieces up against your glasses. 2. Hold up the binocular to your eyes in the normal viewing position, use both hands to hold each barrel firmly. 3. Pull the barrels apart or push the barrels together until you see a single circular field with both of your eyes. 4. Choose your target object. 5. Looking with only your left eye, turn the focus knob until the object you are looking is focused. 6.
Operation of Menu Buttons 1. Use down arrow key to move around menus 1. Use up arrow key to move around menus 2. Reduces image button 2. Enlarges image button 1. Press once - Photograph mode 2. Press twice - Video mode 3. Press once more - Preview photos 4. Press four times - Taking mode 5. Menu switch (catch / set) 6. Hold down for 3 seconds to turn unit off 1. Video mode key 2. Menu options key 3. Hold down for 2 seconds then it will be in menu mode www.barska.
Taking a Picture Note: Insert SD card to the unit before taking pictures, or unit will not function. Warning: The unit will be turned off when you insert or extract memory card. Please make sure that the unit is off before removing SD card 1. To turn camera on press “On” button for about 1-2 seconds, it will start functioning, with the image of this screen. 2. You are now in photograph mode, press the shutter to take pictures. 3.
Taking Video 1. After turning unit on press mode button twice, you will be now be in video mode. To start recording press set button, press set button again when you are finished recording. 2. Press mode button once more, it will be in preview video mode, and will start the video when you press the shutter. 3. Press mode button once more, it will return to the photograph mode. Deleting Video 1. Hold down set key to bring delete menu to screen 2. Select video to be deleted by using the arrow keys 3.
Picture Pixel Setting Press mode button, select “size”, then press menu options to select the pixel needed, then press set button, press it once more, it will return to taking pictures mode. → Image Quality Setting Press mode button, select “Quality”, then press menu options to select the quality needed, then press set button, press it once more, it will return to taking pictures mode.
Expose Value Setting Press mode button, select “EV”, then press menu options to select the value needed, then press set button, press it once more, it will return to taking pictures mode. → White Balance Setting Press mode button, select “white balance”, then press menu options to select the value needed, then press set button, press it once more, it will return to taking pictures mode. → www.barska.
ISO Setting Press mode button, select “ISO”, then press menu options to select the value needed, then press set button, press it once more, it will return to taking pictures mode. → Color Mode Setting Press mode button, select “Color”, then press menu options to select the value needed, then press set button, press it once more, it will return to taking pictures mode.
Image Sharpness Setting Press mode button, select “sharpness”, then press menu options to select the value needed, then press set button, press it once more, it will return to taking pictures mode. → Preview Function Setting Press mode button, select “Preview”, then press menu options to select on or off, then press set button, press it once more, it will return to taking pictures mode.
Burst Setting Press mode button, select “Burst”, then press menu options to select on or off, then press set button, press it once more, it will return to taking pictures mode. → Format Setting Press mode button, select “Format”, then press menu options to select cancel or execute, then press set button, press it once more, it will return to taking pictures mode.
Language Setting Press mode button, select “Language”, then press menu options to select the language needed, then press set button, press it once more, it will return to taking pictures mode. → Auto Off Time Setting Press mode button, select “Auto off”, then press menu options to select the time Value, then press set button, press it once more, it will return to taking pictures mode. → System Reset Setting Press mode button, select “Sys.
Light Freq Setting Press mode button, select “Light Freq”, then press menu options to select the value needed, then press set button, press it once more, it will return to taking pictures mode. → Date Setting Press mode button, select “Date input”, then press menu options to select off or set, then press set button, press it once more, it will return to taking pictures mode.
Installation Before using the PC Cam, please make sure to install the CD driver to the PC 1. Put the CD into the PC CD-ROM, PC will read the CD automatically. 2. Then you will find this image on the computer screen, please select “NEXT” of each dialog box, the PC will complete installation gradually. 3. Wait until the last image appears and press “Finish” you have finished installation. 4.
5. Please select “option” then “preview” (see sample below), and it will start the PC Cam function Using PC Cam 1. When you select PC Cam, link the USB cable to the PC’s USB slot, the PC will be in sync with the unit automatically, wait for the video images to appear, the unit is now in sync with the PC. Note: Image may be hazy unless the photographic distance of binocular is more than 60ft/18m away, not suitable for close distance. www.barska.
1 YEAR LIMITED WARRANTY BINOCULARS WITH DIGITAL CAMERA BARSKA® Optics, as manufacturer, warrants this new precision optical product to be free of original defects in materials and/or workmanship for the length of time specified by this warranty. This warranty does not include damage caused by abuse, improper handling, installation, maintenance, normal wear-and-tear, unauthorized repairs or modifications and tampering in anyway. This warranty is limited to the original purchaser and is not transferable.
www.barska.
