Programming Manual

i480e&i480e-MD2 Programming Manual
81 / 139
packet
The partial or complete packet of an object, cannot
be NULL, cannot include ‘\r’.
Note
N/A
15.4 MAPCGETCMTIND
The MAPCGETCMTIND indication is used to inform the client host that the
current pull process is over.
Indication
AT-B MAPCGETCMTIND
Parameters
N/A
Note
The client host shall use the MAPCGETCMT command to complete
the current UPLOAD operation every time when the [moreData]
field of the MAPCGETDATATIND indication equals to zero.
15.5 MAPCPUSHCONTIND
The MAPCPUSHCONTIND indication is used to inform the client host to
continue the push operation.
Indication
AT-B MAPCPUSHCONTIND
Parameters
N/A
Note
N/A
15.6 MAPCPUTCMTIND
The MAPCPUSHCMTIND indication is used to inform the client host that the
push operation is completed.
Indication
AT-B MAPCPUSHCMTIND
Parameters
N/A
Note
N/A
Barrot Confidential