Programming Manual

67 / 139
i480e&i480e-MD2 Programming Manual
repository */
pbapc_spb_not_found, /*! Phonebook does not exist */
pbapc_vcl_no_param_resources = 0x20, /*! No resources to generate
application specific parameters header for
PullvCardList. */
pbapc_vcl_no_pbook_folder, /*! A phonebook folder was specified for
PullvCardList where there are no sub-folders (i.e.
in pb). */
pbapc_vcl_invalid_pbook, /*! A phonebook folder was specified for
PullvCardList which is invalid */
pbapc_vce_no_param_resources = 0x30, /*! No resources to generate
application specific parameters
header for PullvCardEntry. */
pbapc_vce_no_name_resources, /*! No resources to generate the
vCard entry name for PullvCardEntry.
*/
pbapc_vce_invalid_entry, /*! Invalid entry for this phonebook
for PullvCardEntry. Only folder 'pb'
can contain an entry 0. */
pbapc_ppb_no_param_resources = 0x40, /*! No resources to generate
application specific parameters
header for PullPhonebook. */
pbapc_ppb_no_name_resources, /*! No resources to generate the
phonebook name for
PullPhonebook. */
pbapc_ppb_no_required_name, /*! No name for PullPhonebook
when it is required. e.g. server is
not in a phonebook directory */
pbapc_ppb_no_repository, /*! The server does not contain this
repository */
pbapc_prop_sdp_error, /*! Request to get the server properties
failed due to an SDP error */
pbapc_end_of_status_list
} phone_book_status;
12.2 PBCCONN
The PBCCONN command is used to establish a PBAP connection with a remote
device.
Command
AT+B PBCCONN [bd]
Barrot Confidential