Programming Manual

25 / 139
i480e&i480e-MD2 Programming Manual
bit 6: OPP Client, 0: disable, 1:enable;
bit 7: OPP Server, 0: disable, 1:enable;
bit 8: SPP, 0: disable, 1:enable;
bit 9: PBAP Server, 0: disable, 1:enable;
bit 10: HID mouse, 0: disable, 1:enable;
bit 11: HID keyboard, 0: disable, 1:enable.
Note
1. When both bit10 and bit11 equal to 1, it will only support HID
keyboard.
2. For instance, 02 represents HFP is enabled; 112 represents HFP,
PBAP and SPP are enabled; 512 represents HFP, PBAP, SPP and HID
mouse are enabled; 912 represents HFP, PBAP, SPP and HID
keyboard are enabled; 400 represents HID mouse is enabled; 800
represents HID keyboard is enabled.
3. If either HID mouse or HID keyboard is enabled, the module will
support HID streaming method. Under this circumstance, it doesn’t
need to send Keyboard/mouse input reports that are formatted as
AT+B command, but it can directly send report contents. See
chapter 18.5 and 18.6.
4.18 GCTST
Command
AT+B GCTST [profile]
Indication
AT-B GCTST [profile],[state],[bdaddr]
Parameters
profile
1: HFP
2: A2DP
3: AVRCP
4: PBAP
5: SPP
12: BLE
state
Profile state.
1: the corresponded connection of the inquired
profile doesn’t exist, this parameter will return
0 and the Bluetooth address will return
000000000000
Barrot Confidential