Programming Manual

i480e&i480e-MD2 Programming Manual
20 /
139
i480e&i480e-MD2 Programming Manual
20 / 139
Failed: AT-B GLDN 1,
Parameter
name
Device name.
Note
N/A
4.4SLDN
The SLDN command is used to set the local device name.
Command
AT+B SLDN [name]
Response
Succeed: AT-B SLDN 0
Failed: AT-B SLDN 1
Parameter
name
Device name. UTF-8 format.
Note
The length of name can be up to 31 bytes at maximum.
4.5GRDN
The GRDN command is used to get the specific remote device name.
Command
AT+B GRDN [bd]
Response
Succeed: AT-B GRDN 0,[bd],[name]
Failed: AT-B GRDN 1,[bd],
Parameters
bd
Remote Bluetooth device address.
name
Remote device name.
Note
bd is comprised of 12 bytes hexadecimal characters.
4.6SPIN
The SPIN command is used to set the local PIN code.
Command
AT+B SPIN [pin]
Barrot Confidential