Programming Manual

i480e&i480e-MD2 Programming Manual
14 /
139
i480e&i480e-MD2 Programming Manual
14 / 139
2.1.2 Default Device Name
i480e default device name is I480E.
2.1.3 Default PIN Code
The default PIN Code is 0000.
2.1.4 Default Device Type
The default device type is 0x001F00 (Unknown Bluetooth device).
2.1.5 Default Speaker Volume
The default speaker volume is 15. It can be changed with the command in the
chapter 6.11.
2.1.6 Default Microphone Volume
The default microphone volume is 15. It can be changed with the command in
the chapter 6.12.
2.2 Boot-up Timing
Host shall open the UART port immediately after power on the Bluetooth module.
The host can receive the “AT-B SNKINIT 0\r” string when the Bluetooth system
initializing finished.
2.3 Parameter Maximum Length
This chapter introduces parameters’ maximum length.
2.3.1 Bluetooth Software Version Information
An ASCII code string like “I480E.STD.0.20140701.1”.
Barrot Confidential