Programming Manual

135 / 139
i480e&i480e-MD2 Programming Manual
GATT status is changed.
Indication
AT-B BLESTATE [state]
Parameters
state
0: Initial status;
1: advertising status;
3: Connected status;
4:gattconnected_and_scanning
5: gattDisconnecting;
6: Idle.
7:scanning
Note
N/A
30.2 PSKREQ
The PSKREQ is used to inform the host the remote need to input pin code by AT
command AT+B BLEPSKEY [PASSKEY].
Indication
AT-B PSKREQ 1\r
Note
N/A
30.3 BLENOTIIND
The BLE notification is used to inform the host unit that GATT data is received
from the peripheral.
Indication
AT-B BLENOTIIND [cid],[handle],[length],[data]\r
Parameters
cid
The connected channel ID
handle
The handle of the Characteristic that send notification
length
The length of the notification data
data
The notification data
Note
N/A
Barrot Confidential