Programming Manual

i480e&i480e-MD2 Programming Manual
113 / 139
21.10 AGCNUMIND
The AGCNUMIND indication is used to tell the host the HF has sent a command
to get subscriber number information, only for HFP.
Indication
AT-B AGCNUMIND
Parameters
N/A
Note
AT+B AGCNUM shall be sent as responses.
21.11 AGCLCCIND
The AGCLCCIND indication is used to tell the host the HF has sent a command
to get current calls list of AG, only for HFP.
Indication
AT-B AGCLCCIND
Parameters
N/A
Note
AT+B AGCLCC shall be sent as responses.
21.12 AGBIAIND
The AGBIAIND indication is used to tell the host the HF wants to
activate/deactivate indicators which sent by AG, only for HFP1.6.
Indication
AT-B AGBIAIND [mask]
Parameters
mask
Mask indicating which indicators are active and can be
sent to HF.
0x01: service indicator;
0x02: call indicator;
0x04: call setup indicator;
0x08: call held indicator;
0x10: signal strength indicator;
0x20: roaming status indicator;
0x40: battery charge indicator;
0x7f: all indicators;
Note
N/A
Barrot Confidential