Programming Manual

i480e&i480e-MD2 Programming Manual
111 / 139
number
Phone number to dial, if type =2, this parameter is
ignored.
Note
After received this indication, AT+B AGOK or AT+B AGERROR should
be used as a response.
21.4 AGCLIPIND
The AGCLIPIND indication is used to tell the host the HF wants to
enable/disable caller ID notifications, only for HFP.
Indication
AT-B AGCLIPIND [enable]
Parameters
enable
Whether to enable or disable caller ID notifications.
0: disable;
1: enable.
Note
N/A
21.5 AGCCWAIND
The AGCCWAIND indication is used to tell the host the HF wants to
enable/disable call waiting notifications, only for HFP.
Indication
AT-B AGCCWAIND [enable]
Parameters
enable
Whether to enable or disable call waiting notifications.
0: disable;
1: enable.
Note
N/A
21.6 AGDTMFIND
The AGDTMFIND indication is used to tell the host the HF has requested that a
DTMF code be transmitted by the AG, only for HFP.
Indication
AT-B AGDTMFIND [key]
Parameters
key
The single character DTMF code to transmit, may be
Barrot Confidential