Programming Manual

Programming Manual
2 / 25
VERSION HISTORY
REVISION
AMENDMENT
DATE
AUTHOR
1.0
Initial release
2018-03-01
Rui Fan
1.1
Add Central commands
2018-06-01
Rui Fan
1.2
Add channel switch command;
Add disconnect command;
Modify connect succeeds indication;
Remove GPIO disconnect function.
2018-06-29
WenQing Qiu
1.3
Add OTA command and description
2018-07-02
WenQing Qiu
1.4
Add set adv. data command:
AT+ADVDATA
2018-07-04
WenQing Qiu
1.5
Add query adv. data command:
AT+ADVDATA?
Add scan reply data command:
AT+SRDATA
Add query config. firmware version
command:
AT+GCFGVER
Add set and query connect
parameters command:
AT+CONNPARAM
Add set target service UUID
command:
AT+TARGETUUID
2018-07-13
WenQing Qiu
1.6
Writing hex data to
FF03(Characteristic) of smart phone’s
FF00(Service) to make module enter
OTA mode. The hex data changes to
“64 00 00 00”.
2018-07-24
WenQing Qiu
Barrot Confidential