Installation & Assembly

g. Using two 10mm round head Phillips machine

screws, secure rear handle to the two threaded

corner prongs of the front handle (Fig. 6).

h. Snap on rear handle cover (Fig. 7)

Fig. 6

Fig. 7

Fig. 9

Fig. 11

10mm

Screws

Rear Rear

HandleHandle

Mounting The Catch To The Post

a. Slide the catch onto the catch bracket (Fig. 8).

b. Align the catch at the correct height along post

to engage with the front handle striker (Fig. 9).

c. While holding the catch bracket in place, mark

the center of the two slotted holes on the inside

of the post (Fig. 10).

d. Slide the catch off of the bracket and mark the

center of the slotted hole on the front of the

post (Fig. 11).

Fig. 8

CatchCatch

Catch Catch

BracketBracket

Fig. 10

Inside Inside

of Postof Post