Installation Guide

2
Thank you for choosing the Barrette Outdoor Living Fence.
Please read the instructions completely before assembling
your fence. Retain manual and your dated sales slip for
future reference and warranty claims.
Before You Begin…
Check your local zoning laws.
Local zoning laws and Home Owners Associations may
regulate the location, style and height of your fence or even
require a permit signoff beforehand.
Contact your local utilities companies.
You must have the utility companies clearly mark your property
for electrical, gas or water lines to avoid puncturing any
unseen underground utilities.
Pay to mark your property line.
Being proactive will save you time and money from any
disputes from neighbors.
Material Checklist:
Panel Assembly:
Flat Head Screwdriver
Circular Saw or Hand Saw
Bag of High Strength Concrete (1
1
1
1
2
2
bags per hole average)
Coarse Gravel (6" per hole)
Water for Concrete
Clean Rags
Post Hole Digger
ATTENTION:
Before you assemble the fence:
PLEASE TAKE A COMPLETE INVENTORY OF ALL PARTS USING THE KIT CONTENTS.
DO NOT ATTEMPT TO ASSEMBLE THE FENCE IF PARTS ARE MISSING OR DAMAGED.
Please do not return the product to the store, for assistance or replacement parts call:
1-800-336-2383
Safety Glasses
String Line Stakes
Spool of String
Vinyl Cement
Line Level
Tape Measure
Shovel
Rubber Mallet
Straight Picket Top
Scalloped Picket Top
Straight Dogear
Picket Top
Scallop Staggered
Picket Top
Scallop Dogear
Picket Top
Straight Spade
Picket Top
Scallop Spade
Picket Top
Post Spacing will be determined by gate width and hardware.
Purchased Metal Stiffener
Fence Panel
Screw/Nail Together As Shown
Fence Panel
3/4" Actual Thickness
Purchased 1x6x8'
Cut To 4-5/8"
Purchased 1x4x8'
Cut To 3-1/8"
Top View of Post
Top View of Post