Instructions / Assembly

4
To Reconfigure for Right-Side Mounting:
a. Place the latch on a at surface, with the
“nger” brackets facing the right, as shown (Fig.
5).
b. Carefully remove spring from the post plate and
swing arm with small needle-nose pliers, using
caution not to bend or break the hooked ends
of the spring (Fig. 6).
c. Flip the post plate over so the “nger” brackets
face the left and re-attach the spring, as shown
(Fig. 7).
d. Continue installation from Step 1.
Fig. 5
Fig. 6
Fig. 7
“Finger”
3.