Operator's Manual

barrett.net
7
2. Before pulling the charging handle, disengage the charging
handle latch with index finger on left side of handle. Pull
charging handle back with thumb and index fingers. Once
the charging handle is in the rearward most position, release
handle with both fingers and let the handle go forward
without any assistance. This will ensure the full force of the
buer spring is utilized to chamber the first round (FIGURE 2).
3. Place safety selector switch to SAFE position until ready to
operate (FIGURE 3).
NOTE: THE HAMMER MUST BE COCKED IN ORDER FOR THE
SELECTOR TO BE PLACED ON “SAFE”.
FIGURE 3
SAFE
FIGURE 2
CHARGING HANDLE LATCH
CHARGING HANDLE