Operator's Manual

barrett.net
15
CLEANING AND LUBRICATION
UNLOAD AND CLEAR THE RIFLE BEFORE CLEANING.
DO NOT INSERT CLEANING RODS THROUGH MUZZLE. THE
BARREL CROWN COULD BE DAMAGED WHICH WOULD
SEVERELY DEGRADE THE ACCURACY OF THE RIFLE.
EYE PROTECTION IS RECOMMENDED WHILE CLEANING.
CLEANING PROCEDURE
The rifle should be cleaned and lubricated after each shooting
session.
1. Apply cleaning solvent to a chamber brush and clean the
chamber.
2. Apply cleaning solvent to a bore brush and clean the bore.
Barrett Heavy Bore Cleaner is recommended. Clean bore from
the chamber end of barrel to prevent damage to the muzzle.
3. Clean the muzzle device with a sti plastic brush and bore
solvent. It is best to clean the muzzle device at the same time
the barrel is being cleaned as the bore solvent will help loosen
carbon build-up on its interior walls.
4. Clean the bolt face with bore solvent. Use a sti plastic brush
to remove debris from both the extractor and the ejector.
Depress the ejector and extractor by hand to test their smooth
function.
5. Use dry patches as necessary to remove cleaner from the bore
and chamber.
CAUTION
CAUTION
WARNING