Operator's Manual

barrett.net
13
BOLT DISASSEMBLY
NOTE: DISASSEMBLY OF THE EXTRACTOR SPRING AND
INSERT FROM THE EXTRACTOR ASSEMBLY IS NOT REQUIRED
FOR REGULAR CLEANING AND IS NOT RECOMMENDED.
DISASSEMBLE ONLY WHEN EXCESSIVE DEBRIS PREVENTS
NORMAL OPERATION OR PARTS ARE DAMAGED.
1. Use a pin punch to remove the extractor pin. Applying
pressure to the rear of the extractor directly above the
extractor spring will aid in removal of extractor pin. Be aware
that the extractor spring and extractor are under compression.
2. Remove the extractor assembly (FIGURE 14).
3. Further disassembly of the bolt is not necessary for field
maintenance.
DISASSEMBLY OF LOWER RECEIVER
THE DISASSEMBLY OF TRIGGER COMPONENTS SHOULD BE
ACCOMPLISHED BY A QUALIFIED ARMORER.
THE BUFFER RETAINER IS UNDER STRONG SPRING PRES-
SURE. IF NOT PROPERLY RETAINED, IT CAN BE LAUNCHED
FROM ITS TUBE AND CAUSE INJURY.
CAUTION
CAUTION
FIGURE 14
BOLT
EXTRACTOR PIN
EXTRACTOR