Operator's Manual

REC7 DI
12
DISASSEMBLY OF UPPER RECEIVER COMPONENTS
1. Pull back the charging handle and withdraw the bolt carrier
assembly (FIGURE 12).
2. Lift the charging handle out of its track and remove it.
DISASSEMBLY OF THE BOLT CARRIER
1. Remove the firing pin retaining pin from the bolt carrier.
Gently push or pull the pin out of the bolt carrier.
2. Remove the firing pin from the bolt carrier. Using a clean soft
surface, lightly strike the rear of the bolt carrier to assist in
removal. (Never use a sharp object to push the firing pin out
of the bolt)
3. To remove cam pin, rotate cam pin 90 degrees and push the
bolt into the bolt carrier. Cam pin should extract by hand.
4. Remove bolt assembly from the bolt carrier.
1
2
FIGURE 13
FIRING PIN
FIRING PIN
RETAINING PIN
CAM PIN
BOLT
FIGURE 12