Operator's Manual
barrett.net
11
2. The lower assembly (FIGURE 10-2).
SEPARATING THE UPPER AND LOWER ASSEMBLIES
1. Ensure rifle is unloaded and clear by following the steps in
the previous section. With the safety on and bolt closed, push
the take down pin (rear most pin) until it clears its detent and
stops (FIGURE 11). Take down and pivot pins are captured and
cannot be removed. Push the pivot pin (forward most pin)
until it clears its detent and stops. Separate the upper and
lower receivers.
FIGURE 10-2
FIGURE 11
PIVOT PIN
TAKE DOWN PIN