Operator's Manual

REC7 DI
10
DISASSEMBLY AND ASSEMBLY
This rifle separates into two primary assemblies:
1. The upper assembly (FIGURE 10-1).
4. Use caution by visually and physically inspecting the
chamber and magazine well to ensure that it is empty
(FIGURE 8).
5. Place the selector switch on SAFE (FIGURE 9). Press the upper
portion of the bolt catch to allow the bolt assembly to close.
Repeat steps 3-5 to ensure rifle is unloaded and cleared.
FIGURE 8
PHYSICALLY AND
VISUALLY ENSURE THE
CHAMBER IS EMPTY
FIGURE 10-1
BOLT CATCH
FIGURE 9