Safety Guide

REC10
8
SAFETY MECHANISM - FIGURE 3
The REC10 rifle has a two-position safety : safe ( ) or fire
( ). Rotate the safety lever to the safe position to prohibit the
rifle from firing. The factory REC10 safety features ambidextrous
levers and can be adjusted to operate 90 or 45 degrees between
safe and fire.
FIGURE 3
SAFE
FIRE
NOTE: THE HAMMER MUST BE COCKED IN ORDER FOR THE
SELECTOR TO BE PLACED ON “SAFE”.
1. Ensure the safety lever is in the safe ( ) position.
2. Insert a loaded magazine fully into the magazine well until the
catch engages and holds the magazine in place (FIGURE 4). Tap
the magazine upward to ensure the magazine is fully seated,
then pull down on the magazine to ensure proper retention.
FIGURE 4
KEEP MUZZLE POINTED IN A SAFE DIRECTION UNTIL READY
TO FIRE
WARNING
LOADING AND FIRING