Safety Guide
REC10
6
BREAK–IN PROCEDURE
Barrett does not oer a specific procedure for barrel break-in other
than checking for obstructions while using your new rifle.
Experience has shown that the bore becomes less prone to fouling
over time and that accuracy may improve with use. Ensure that
the rifle is adequately lubricated and follow the loading/unloading
and safety procedures when operating your rifle.
DESCRIPTION OF FIREARM - FIGURE 1
The REC10 is a semi-automatic, hammer fired, magazine
fed, precision rifle with a rotating bolt actuated by direct gas
impingement. User-selected accessories may be mounted on the
Mil-Std 1913 top rail or on the Barrett Rail System (BRS) with the
aid of M-Lok attachment points.
FIGURE 1