Safety Guide

REC10
16
solvent. It is best to clean the muzzle device at the same time
the barrel is being cleaned as the bore solvent will help loosen
carbon build-up on its interior walls.
6. Clean the bolt face with bore solvent. Use a sti plastic brush to
remove debris from both the extractor and the ejector. Depress
the ejector and extractor by hand or a spent casing to test their
smooth function.
7. Use dry patches as necessary to remove cleaner from the bolt
face and locking lugs
8. Clean the remainder of the rifle with cotton-tipped swabs,
general purpose brushes and cleaning cloths.
LUBRICATION POINTS (FIGURE 15)
• Do not add lubricant to the interior of the magazine
• Do not lubricate ammunition
• Do not lubricate the chamber and bore
• Never store your rifle in a wet carrying case
It is advised to apply a light coat of temperature appropriate
lubricant to all functional parts. Recommended lubrication points
are in red.