Safety Guide
barrett.net
15
CLEANING PROCEDURE
The rifle should be cleaned and lubricated after each shooting
session.
1. Clean the chamber area with an appropriate sized brush and
solvent. Inspect for irregular or excessive carbon build-up,
scoring or other chamber damage.
2. Swab the chamber with a clean, dry, patch prior to next use. A
bore guide is recommended for bore and chamber cleaning.
3. Clean the bore with an appropriate sized bore brush and
solvent. Clean from chamber to muzzle ONLY, as cleaning in
this direction minimizes opportunity for damaging the muzzle
crown.
4. Swab the bore with a clean, dry patch prior to next use.
5. Clean the muzzle device with a sti plastic brush and bore
CLEANING AND LUBRICATION
Periodic cleaning and lubrication is important for a long life of high
performance from your rifle and prevents the corrosive eects of
moisture.
Materials used for cleaning can be found online at
barrett.net/store.
UNLOAD THE RIFLE BEFORE CLEANING. ENSURE THAT NO
LIVE AMMUNITION IS PRESENT DURING CLEANING.
WARNING
DO NOT INSERT CLEANING RODS THROUGH THE MUZZLE.
THE BARREL CROWN COULD BE DAMAGED WHICH WOULD
SEVERELY DEGRADE THE ACCURACY OF THE RIFLE.
CAUTION
EYE PROTECTION IS RECOMMENDED WHILE CLEANING.
CAUTION