Safety Guide

REC10
12
DISASSEMBLY OF THE BOLT CARRIER - FIGURE 11
1. Remove the firing pin retaining pin from the bolt carrier. Gently
push or pull the pin out of the bolt carrier.
2. Remove the firing pin from the bolt carrier. Using a clean soft
surface, lightly strike the rear of the bolt carrier to assist in
removal (Never use a sharp object to push the firing pin out of
the bolt).
3. To remove cam pin, push the bolt into the bolt carrier then
rotate the cam pin until the flats will clear the gas key. The
cam pin should extract by hand.
4. Remove bolt from the bolt carrier.
FIGURE 11
FIRING PIN
FIRING PIN
RETAINING PIN
CAM PIN
BOLT