Safety Guide

barrett.net
11
DISASSEMBLY
1. Ensure rifle is unloaded and clear by following the steps in
the UNLOADING section. With the safety on and bolt closed,
push the take down pin (rear most pin) until it clears its detent
and stops. Push the pivot pin (forward most pin) until it clears
its detent and stops (FIGURE 9-A). Take down and pivot pins
are captured and cannot be removed. Separate the upper and
lower receivers (FIGURE 9-B).
FIGURE 9
A
B
PIVOT PIN
TAKE DOWN PIN
DISASSEMBLY OF UPPER RECEIVER COMPONENTS
1. Pull back the charging handle and withdraw the bolt carrier
assembly (FIGURE 10-A).
2. Slide the charging handle out of its track and remove it (FIGURE
10-B).
FIGURE 10
A
A
B