Manual

21

DISASSEMBLY OF LOWER RECEIVER
Caution
The disassembly of trigger components should be accomplished by a
qualified armorer.
Caution
The buffer is under strong spring pressure. If un-captured, it can be
launched from its tube and cause injury.
Note
Do not pull trigger while lower is disassembled from the upper. The hammer will
strike the bolt catch which may damage or break the bolt catch.
1. The retainer and the buffer spring must be held simultaneously in order to
remove safely. (Figure 32). Push on the buffer face while holding the
retainer down with another finger or a suitable tool. Carefully remove the
buffer with the buffer spring. (Figure 33).
Figure 32. Figure 33.